Source code for RsFsw.Implementations.Applications.K91_Wlan.Configure.Burst.Spectrum.Fft.Immediate

from ........Internal.Core import Core
from ........Internal.CommandsGroup import CommandsGroup


# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class ImmediateCls:
	"""Immediate commands group definition. 1 total commands, 0 Subgroups, 1 group commands"""

	def __init__(self, core: Core, parent):
		self._core = core
		self._cmd_group = CommandsGroup("immediate", core, parent)

	def set(self, opc_timeout_ms: int = -1) -> None:
		"""SCPI: CONFigure:BURSt:SPECtrum:FFT[:IMMediate] \n
		Snippet: driver.applications.k91Wlan.configure.burst.spectrum.fft.immediate.set() \n
		This remote control command configures the result display type of window 2 to be 'FFT Spectrum'. Results are only
		displayed after a measurement is executed, e.g. using the method RsFsw.Applications.K10x_Lte.Initiate.Immediate.
		set command. Note that the CONF:BURS:<ResultType>:IMM commands change the screen layout to display the 'Magnitude
		Capture' buffer in window 1 at the top of the screen and the selected result type in window 2 below that.
		Any other active windows are closed. Use the LAYout commands to change the display (see 'Working with windows in the
		display') . \n
			:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call."""
		self._core.io.write_with_opc(f'CONFigure:BURSt:SPECtrum:FFT:IMMediate', opc_timeout_ms)