from ......Internal.Core import Core
from ......Internal.CommandsGroup import CommandsGroup
from ......Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class DtimeCls:
"""
| Commands in total: 1
| Subgroups: 0
| Direct child commands: 1
"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("dtime", core, parent)
[docs]
def set(self, dropout_time: float) -> None:
"""
``TRIGger[:SEQuence]:DTIMe`` \n
Snippet: ``driver.applications.k70Vsa.trigger.sequence.dtime.set(dropout_time = 1.0)`` \n
Defines the time the input signal must stay below the trigger level before a trigger is detected again. For input from
the 'Analog Baseband' interface using the baseband power trigger (BBP) , the default drop out time is set to 100 ns to
avoid unintentional trigger events (as no hysteresis can be configured in this case) .
:param dropout_time: Dropout time of the trigger. Range: 0 s to 10.0 s , Unit: S
"""
param = Conversions.decimal_value_to_str(dropout_time)
self._core.io.write(f'TRIGger:SEQuence:DTIMe {param}')
[docs]
def get(self) -> float:
"""
``TRIGger[:SEQuence]:DTIMe`` \n
Snippet: ``value: float = driver.applications.k70Vsa.trigger.sequence.dtime.get()`` \n
Defines the time the input signal must stay below the trigger level before a trigger is detected again. For input from
the 'Analog Baseband' interface using the baseband power trigger (BBP) , the default drop out time is set to 100 ns to
avoid unintentional trigger events (as no hysteresis can be configured in this case) .
:return: dropout_time: Dropout time of the trigger. Range: 0 s to 10.0 s , Unit: S
"""
response = self._core.io.query_str(f'TRIGger:SEQuence:DTIMe?')
return Conversions.str_to_float(response)