from .....Internal.Core import Core
from .....Internal.CommandsGroup import CommandsGroup
from .....Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class ContinuousCls:
"""Continuous commands group definition. 1 total commands, 0 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("continuous", core, parent)
[docs] def set(self, state: bool) -> None:
"""SCPI: INITiate:CONTinuous \n
Snippet: driver.applications.k70Vsa.initiate.continuous.set(state = False) \n
Controls the measurement mode for an individual channel. Note that in single measurement mode, you can synchronize to the
end of the measurement with *OPC, *OPC? or *WAI. In continuous measurement mode, synchronization to the end of the
measurement is not possible. Thus, it is not recommended that you use continuous measurement mode in remote control, as
results like trace data or markers are only valid after a single measurement end synchronization. If the measurement mode
is changed for a channel while the Sequencer is active (see method RsFsw.Initiate.Sequencer.Immediate.set) , the mode is
only considered the next time the measurement in that channel is activated by the Sequencer. \n
:param state: ON | OFF | 0 | 1 ON | 1 Continuous measurement OFF | 0 Single measurement
"""
param = Conversions.bool_to_str(state)
self._core.io.write(f'INITiate:CONTinuous {param}')
[docs] def get(self) -> bool:
"""SCPI: INITiate:CONTinuous \n
Snippet: value: bool = driver.applications.k70Vsa.initiate.continuous.get() \n
Controls the measurement mode for an individual channel. Note that in single measurement mode, you can synchronize to the
end of the measurement with *OPC, *OPC? or *WAI. In continuous measurement mode, synchronization to the end of the
measurement is not possible. Thus, it is not recommended that you use continuous measurement mode in remote control, as
results like trace data or markers are only valid after a single measurement end synchronization. If the measurement mode
is changed for a channel while the Sequencer is active (see method RsFsw.Initiate.Sequencer.Immediate.set) , the mode is
only considered the next time the measurement in that channel is activated by the Sequencer. \n
:return: state: ON | OFF | 0 | 1 ON | 1 Continuous measurement OFF | 0 Single measurement"""
response = self._core.io.query_str(f'INITiate:CONTinuous?')
return Conversions.str_to_bool(response)