from .......Internal.Core import Core
from .......Internal.CommandsGroup import CommandsGroup
from .......Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class HoldoffCls:
"""
| Commands in total: 1
| Subgroups: 0
| Direct child commands: 1
"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("holdoff", core, parent)
[docs]
def set(self, time: float) -> None:
"""
``TRIGger[:SEQuence]:IFPower:HOLDoff`` \n
Snippet: ``driver.applications.k50Spurious.trigger.sequence.ifPower.holdoff.set(time = 1.0)`` \n
Defines the holding time before the next trigger event. Note that this command can be used for any trigger source, not
just IF Power (despite the legacy keyword) . Note: If you perform gated measurements in combination with the IF Power
trigger, the FSW ignores the holding time for frequency sweep, FFT sweep, zero span and I/Q data measurements.
:param time: Range: 0 s to 10 s, Unit: S
"""
param = Conversions.decimal_value_to_str(time)
self._core.io.write(f'TRIGger:SEQuence:IFPower:HOLDoff {param}')
[docs]
def get(self) -> float:
"""
``TRIGger[:SEQuence]:IFPower:HOLDoff`` \n
Snippet: ``value: float = driver.applications.k50Spurious.trigger.sequence.ifPower.holdoff.get()`` \n
Defines the holding time before the next trigger event. Note that this command can be used for any trigger source, not
just IF Power (despite the legacy keyword) . Note: If you perform gated measurements in combination with the IF Power
trigger, the FSW ignores the holding time for frequency sweep, FFT sweep, zero span and I/Q data measurements.
"""
response = self._core.io.query_str(f'TRIGger:SEQuence:IFPower:HOLDoff?')
return Conversions.str_to_float(response)