from .......Internal.Core import Core
from .......Internal.CommandsGroup import CommandsGroup
from .......Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class StepCls:
"""
| Commands in total: 1
| Subgroups: 0
| Direct child commands: 1
"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("step", core, parent)
[docs]
def set(self, step: float) -> None:
"""
``CONFigure:PSWeep:Y:STEP`` \n
Snippet: ``driver.applications.k18AmplifierEt.configure.psweep.y.step.set(step = 1.0)`` \n
This command defines the stepsize for the second parameter controlled by the parameter sweep.
:param step: numeric value whose unit depends on the parameter type you have selected with method ``RsFsw.applications.k18AmplifierEt.configure.psweep.y.setting.set()`` : - Hz in case of the center frequency - dB in case of the output level - s in case of the delay between envelope and RF signal - V in case of the envelope bias
"""
param = Conversions.decimal_value_to_str(step)
self._core.io.write(f'CONFigure:PSWeep:Y:STEP {param}')
[docs]
def get(self) -> float:
"""
``CONFigure:PSWeep:Y:STEP`` \n
Snippet: ``value: float = driver.applications.k18AmplifierEt.configure.psweep.y.step.get()`` \n
This command defines the stepsize for the second parameter controlled by the parameter sweep.
:return: step: numeric value whose unit depends on the parameter type you have selected with method ``RsFsw.applications.k18AmplifierEt.configure.psweep.y.setting.set()`` : - Hz in case of the center frequency - dB in case of the output level - s in case of the delay between envelope and RF signal - V in case of the envelope bias
"""
response = self._core.io.query_str(f'CONFigure:PSWeep:Y:STEP?')
return Conversions.str_to_float(response)