from .......Internal.Core import Core
from .......Internal.CommandsGroup import CommandsGroup
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class EvmCls:
"""Evm commands group definition. 2 total commands, 1 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("evm", core, parent)
@property
def slots(self):
"""slots commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_slots'):
from .Slots import SlotsCls
self._slots = SlotsCls(self._core, self._cmd_group)
return self._slots
[docs] def set(self) -> None:
"""SCPI: [SENSe]:ADJust:EVM \n
Snippet: driver.applications.k14Xnr5G.sense.adjust.evm.set() \n
Adjusts the amplitude settings, including attenuator and preamplifier, to achieve the optimal EVM using the maximum
dynamic range. Note that this process can up to several minutes, depending on the number of component carriers you are
measuring. For the auto EVM routine, it is sufficient to send this command. It is not necessary to send method RsFsw.
Applications.K10x_Lte.Initiate.Immediate.set. \n
"""
self._core.io.write(f'SENSe:ADJust:EVM')
[docs] def set_with_opc(self, opc_timeout_ms: int = -1) -> None:
"""SCPI: [SENSe]:ADJust:EVM \n
Snippet: driver.applications.k14Xnr5G.sense.adjust.evm.set_with_opc() \n
Adjusts the amplitude settings, including attenuator and preamplifier, to achieve the optimal EVM using the maximum
dynamic range. Note that this process can up to several minutes, depending on the number of component carriers you are
measuring. For the auto EVM routine, it is sufficient to send this command. It is not necessary to send method RsFsw.
Applications.K10x_Lte.Initiate.Immediate.set. \n
Same as set, but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout_set() to set the timeout value. \n
:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call."""
self._core.io.write_with_opc(f'SENSe:ADJust:EVM', opc_timeout_ms)
def clone(self) -> 'EvmCls':
"""Clones the group by creating new object from it and its whole existing subgroups
Also copies all the existing default Repeated Capabilities setting,
which you can change independently without affecting the original group"""
new_group = EvmCls(self._core, self._cmd_group.parent)
self._cmd_group.synchronize_repcaps(new_group)
return new_group