Power

SCPI Command :

UNIT:PMETer<p>:POWer

Commands in total: 2

Subgroups: 1

Direct child commands: 1

get(powerMeter=PowerMeter.Default) → PowerMeterUnit

# UNIT:PMETer<p>:POWer
value: enums.PowerMeterUnit = driver.unit.pmeter.power.get(powerMeter = repcap.PowerMeter.Default)

Selects the unit for absolute power sensor measurements.

Parameters:

powerMeter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pmeter’)

Returns:

unit: DBM | WATT | W | DB | PCT

set(unit: PowerMeterUnit, powerMeter=PowerMeter.Default) → None

# UNIT:PMETer<p>:POWer
driver.unit.pmeter.power.set(unit = enums.PowerMeterUnit.DBM, powerMeter = repcap.PowerMeter.Default)

Selects the unit for absolute power sensor measurements.

Parameters:

• unit – DBM | WATT | W | DB | PCT

• powerMeter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pmeter’)

Cloning the Group

# Create a copy of the original group, that exists independently
power_copy = driver.unit.pmeter.power.clone()

Subgroups

• Ratio