Egate#

SCPI Command :

[SENSe]:SWEep:EGATe
Commands in total: 16
Subgroups: 8
Direct child commands: 1
get ( ) → bool
set ( state: bool ) → None
# [SENSe]:SWEep:EGATe
# get:
value: bool = driver.sense.sweep.egate.get()
# set:
driver.sense.sweep.egate.set(state = False)

Turns gated measurements on and off. For measurements with an external trigger gate, the measured values are recorded as long as the gate is opened. During a sweep the gate can be opened and closed several times. The synchronization mechanisms with *OPC, *OPC? and *WAI remain completely unaffected. See ‘(Measurement) Points’.

Parameters:

state – ON | OFF | 0 | 1

  • OFF | 0: Switches the function off

  • ON | 1: Switches the function on

Cloning the Group

# Create a copy of the original group, that exists independently
egate_copy = driver.sense.sweep.egate.clone()

Subgroups