Handover

SCPI Command :

[SENSe]:MIXer:FREQuency:HANDover

class HandoverCls

Handover commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → float

# SCPI: [SENSe]:MIXer:FREQuency:HANDover
value: float = driver.sense.mixer.frequency.handover.get()

Defines the frequency at which the mixer switches from one range to the next (if two different ranges are selected) . The handover frequency for each band can be selected freely within the overlapping frequency range. Is only available if the external mixer is active (see [SENSe:]MIXer<x>[:STATe]) .

return

frequency: Unit: HZ

set(frequency: float) → None

# SCPI: [SENSe]:MIXer:FREQuency:HANDover
driver.sense.mixer.frequency.handover.set(frequency = 1.0)

Defines the frequency at which the mixer switches from one range to the next (if two different ranges are selected) . The handover frequency for each band can be selected freely within the overlapping frequency range. Is only available if the external mixer is active (see [SENSe:]MIXer<x>[:STATe]) .

param frequency

Unit: HZ