RefLevel

SCPI Command :

[SENSe]:LIST:RANGe<ri>:RLEVel

class RefLevelCls

RefLevel commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(rangePy=RangePy.Default) → float

# SCPI: [SENSe]:LIST:RANGe<ri>:RLEVel
value: float = driver.sense.listPy.range.refLevel.get(rangePy = repcap.RangePy.Default)

Defines the reference level for a spurious emission measurement range. The sweep list cannot be configured using remote commands during an on-going sweep operation.

param rangePy

optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Range’)

return

ref_level: Reference level. Refer to the specifications document for the reference level range. Unit: dBm

set(ref_level: float, rangePy=RangePy.Default) → None

# SCPI: [SENSe]:LIST:RANGe<ri>:RLEVel
driver.sense.listPy.range.refLevel.set(ref_level = 1.0, rangePy = repcap.RangePy.Default)

Defines the reference level for a spurious emission measurement range. The sweep list cannot be configured using remote commands during an on-going sweep operation.

param ref_level

Reference level. Refer to the specifications document for the reference level range. Unit: dBm

param rangePy

optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Range’)