Value#
SCPI Command :
- INPut:GAIN[:VALue]
- Commands in total: 1Subgroups: 0Direct child commands: 1
- get ( ) float
- set ( level: float ) None
# INPut:GAIN[:VALue] # get: value: float = driver.inputPy.gain.value.get() # set: driver.inputPy.gain.value.set(level = 1.0)
Selects the gain if the preamplifier is activated (INP:GAIN:STAT ON, see method
RsFsw.applications.k10Xlte.inputPy.gain.state.set()) . The command requires the additional preamplifier hardware option.- Parameters:
level – For all FSW models except for FSW85, the following settings are available: 15 dB and 30 dB All other values are rounded to the nearest of these two. 30 dB For older FSW43/FSW50/FSW67 models, the input signal is always ampilfied by about 30 dB when the preamplifier is active. For FSW85 models, no preamplifier is available.