Cfrequency

SCPI Command :

DIAGnostic:SERVice:INPut:MC:CFRequency

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get() → float

# DIAGnostic:SERVice:INPut:MC:CFRequency
value: float = driver.diagnostic.service.inputPy.mc.cfrequency.get()

This command defines the frequency of the calibration signal for FSW models 43 GHz and higher. This command only takes effect if a microwave calibration signal is selected for input (method RsFsw.diagnostic.service.inputPy.select.set() )

Returns:

frequency: Unit: Hz

set(frequency: float) → None

# DIAGnostic:SERVice:INPut:MC:CFRequency
driver.diagnostic.service.inputPy.mc.cfrequency.set(frequency = 1.0)

This command defines the frequency of the calibration signal for FSW models 43 GHz and higher. This command only takes effect if a microwave calibration signal is selected for input (method RsFsw.diagnostic.service.inputPy.select.set() )

Parameters:

frequency – Unit: Hz