Minimum

SCPI Command :

CALCulate<n>:LIMit<li>:ESPectrum<sb>:PCLass<pc>:MINimum
class MinimumCls[source]

Minimum commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(window=Window.Default, limitIx=LimitIx.Default, subBlock=SubBlock.Default, powerClass=PowerClass.Default) → float[source]
# SCPI: CALCulate<n>:LIMit<li>:ESPectrum<sb>:PCLass<pc>:MINimum
value: float = driver.calculate.limit.espectrum.pclass.minimum.get(window = repcap.Window.Default, limitIx = repcap.LimitIx.Default, subBlock = repcap.SubBlock.Default, powerClass = repcap.PowerClass.Default)
Defines the lower limit of a particular power class.

INTRO_CMD_HELP: Note:

  • The first power class always has a lower limit of -200 dBm.

  • The lower limit of a power class must always be the same as the upper limit of the previous power class.

  • The power class must already exist (see method RsFsw.Calculate.Limit.Espectrum.Pclass.Count.set) .

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param limitIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Limit’)

param subBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Espectrum’)

param powerClass

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pclass’)

return

level: Range: -200 dBm to 199.9 dBm, Unit: dBm

set(level: float, window=Window.Default, limitIx=LimitIx.Default, subBlock=SubBlock.Default, powerClass=PowerClass.Default) → None[source]
# SCPI: CALCulate<n>:LIMit<li>:ESPectrum<sb>:PCLass<pc>:MINimum
driver.calculate.limit.espectrum.pclass.minimum.set(level = 1.0, window = repcap.Window.Default, limitIx = repcap.LimitIx.Default, subBlock = repcap.SubBlock.Default, powerClass = repcap.PowerClass.Default)
Defines the lower limit of a particular power class.

INTRO_CMD_HELP: Note:

  • The first power class always has a lower limit of -200 dBm.

  • The lower limit of a power class must always be the same as the upper limit of the previous power class.

  • The power class must already exist (see method RsFsw.Calculate.Limit.Espectrum.Pclass.Count.set) .

param level

Range: -200 dBm to 199.9 dBm, Unit: dBm

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param limitIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Limit’)

param subBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Espectrum’)

param powerClass

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pclass’)