Mode

SCPI Command :

CALCulate<n>:IQ:MODE

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(window=Window.Default) → EvaluationMode

# CALCulate<n>:IQ:MODE
value: enums.EvaluationMode = driver.calculate.iq.mode.get(window = repcap.Window.Default)

This command defines whether the captured I/Q data is evaluated directly, or if it is converted (via FFT) to spectral or time data first. It is currently only available for I/Q Analyzer secondary applications in multistandard mode (not the MSRA primary application) .

Parameters:

window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

Returns:

eval_mode: TDOMain Evaluation in time domain (zero span) . FDOMain Evaluation in frequency domain. IQ Evaluation using I/Q data.

set(eval_mode: EvaluationMode, window=Window.Default) → None

# CALCulate<n>:IQ:MODE
driver.calculate.iq.mode.set(eval_mode = enums.EvaluationMode.FDOMain, window = repcap.Window.Default)

This command defines whether the captured I/Q data is evaluated directly, or if it is converted (via FFT) to spectral or time data first. It is currently only available for I/Q Analyzer secondary applications in multistandard mode (not the MSRA primary application) .

Parameters:

• eval_mode – TDOMain Evaluation in time domain (zero span) . FDOMain Evaluation in frequency domain. IQ Evaluation using I/Q data.

• window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)