Soffset

SCPI Command :

[SENSe]:PMETer<p>:SOFFset

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(powerMeter=PowerMeter.Default) → float

# [SENSe]:PMETer<p>:SOFFset
value: float = driver.applications.k9X11Ad.sense.pmeter.soffset.get(powerMeter = repcap.PowerMeter.Default)

Takes the specified offset into account for the measured power. Only available if method RsFsw.applications.k18AmplifierEt.sense.pmeter.roffset.state.set() is disabled.

Parameters:

powerMeter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pmeter’)

Returns:

sensor_offset: Unit: DB

set(sensor_offset: float, powerMeter=PowerMeter.Default) → None

# [SENSe]:PMETer<p>:SOFFset
driver.applications.k9X11Ad.sense.pmeter.soffset.set(sensor_offset = 1.0, powerMeter = repcap.PowerMeter.Default)

Takes the specified offset into account for the measured power. Only available if method RsFsw.applications.k18AmplifierEt.sense.pmeter.roffset.state.set() is disabled.

Parameters:

• sensor_offset – Unit: DB

• powerMeter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pmeter’)