IqPower

SCPI Command :

TRIGger[:SEQuence]:LEVel:IQPower

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get() → float

# TRIGger[:SEQuence]:LEVel:IQPower
value: float = driver.applications.k91Wlan.trigger.sequence.level.iqPower.get()

Defines the magnitude the I/Q data must exceed to cause a trigger event. Note that any RF attenuation or preamplification is considered when the trigger level is analyzed. If defined, a reference level offset is also considered. For details on the trigger source, see ‘Trigger Source’.

Returns:

trigger_level: Range: -130 dBm to 30 dBm, Unit: DBM

set(trigger_level: float) → None

# TRIGger[:SEQuence]:LEVel:IQPower
driver.applications.k91Wlan.trigger.sequence.level.iqPower.set(trigger_level = 1.0)

Defines the magnitude the I/Q data must exceed to cause a trigger event. Note that any RF attenuation or preamplification is considered when the trigger level is analyzed. If defined, a reference level offset is also considered. For details on the trigger source, see ‘Trigger Source’.

Parameters:

trigger_level – Range: -130 dBm to 30 dBm, Unit: DBM