State

SCPI Command :

[SENSe]:BURSt:SELect:STATe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get() → bool

# [SENSe]:BURSt:SELect:STATe
value: bool = driver.applications.k91Wlan.sense.burst.select.state.get()

Defines the evaluation basis for result displays. Note that this setting is only applicable after a measurement has been performed.

Returns:

state: ON | OFF | 0 | 1 OFF | 0 All detected PPDUs in the current capture buffer are evaluated. ON | 1 The WLAN 802.11 I/Q results are based on one individual PPDU only, namely the defined using method RsFsw.applications.k91Wlan.sense.burst.select.set() . As soon as a new measurement is started, the evaluation range is reset to all PPDUs in the current capture buffer.

set(state: bool) → None

# [SENSe]:BURSt:SELect:STATe
driver.applications.k91Wlan.sense.burst.select.state.set(state = False)

Defines the evaluation basis for result displays. Note that this setting is only applicable after a measurement has been performed.

Parameters:

state – ON | OFF | 0 | 1 OFF | 0 All detected PPDUs in the current capture buffer are evaluated. ON | 1 The WLAN 802.11 I/Q results are based on one individual PPDU only, namely the defined using method RsFsw.applications.k91Wlan.sense.burst.select.set() . As soon as a new measurement is started, the evaluation range is reset to all PPDUs in the current capture buffer.