Dcm

SCPI Command :

CONFigure:WLAN:RUConfig:SEGMent<seg>:CHANnel<ch>:RULocation<cf>:USER<mu>:DCM
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(segment=Segment.Default, channel=Channel.Default, ruAllocationIx=RuAllocationIx.Default, userIx=UserIx.Default) → float[source]
# CONFigure:WLAN:RUConfig:SEGMent<seg>:CHANnel<ch>:RULocation<cf>:USER<mu>:DCM
value: float = driver.applications.k91Wlan.configure.wlan.ruConfig.segment.channel.rulocation.user.dcm.get(segment = repcap.Segment.Default, channel = repcap.Channel.Default, ruAllocationIx = repcap.RuAllocationIx.Default, userIx = repcap.UserIx.Default)

Defines the use of dual carrier modulation for the specified user.

Parameters:

  • segment – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

  • channel – optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)

  • ruAllocationIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rulocation’)

  • userIx – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘User’)

Returns:

type_py: ON | OFF | 0 | 1 OFF | 0 DCM not used ON | 1 DCM is used

set(type_py: float, segment=Segment.Default, channel=Channel.Default, ruAllocationIx=RuAllocationIx.Default, userIx=UserIx.Default) → None[source]
# CONFigure:WLAN:RUConfig:SEGMent<seg>:CHANnel<ch>:RULocation<cf>:USER<mu>:DCM
driver.applications.k91Wlan.configure.wlan.ruConfig.segment.channel.rulocation.user.dcm.set(type_py = 1.0, segment = repcap.Segment.Default, channel = repcap.Channel.Default, ruAllocationIx = repcap.RuAllocationIx.Default, userIx = repcap.UserIx.Default)

Defines the use of dual carrier modulation for the specified user.

Parameters:

  • type_py – ON | OFF | 0 | 1 OFF | 0 DCM not used ON | 1 DCM is used

  • segment – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

  • channel – optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)

  • ruAllocationIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rulocation’)

  • userIx – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘User’)