Reference

SCPI Command :

[SENSe]:DETect:REFerence

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get() → DetectReferenceB

# [SENSe]:DETect:REFerence
value: enums.DetectReferenceB = driver.applications.k6Pulse.sense.detect.reference.get()

The reference level to be used for setting the pulse detection threshold.

Returns:

reference: REFLevel | PEAK | NOISe | ABSolute REFLevel Current reference level PEAK Peak level as measured over the entire capture data interval NOISe Noise level determined from the current capture data according to SENSe:TRACe:MEASurement:DEFine:DURation:MIN. ABSolute Absolute level defined by method RsFsw.applications.k6Pulse.sense.detect.threshold.set() .

set(reference: DetectReferenceB) → None

# [SENSe]:DETect:REFerence
driver.applications.k6Pulse.sense.detect.reference.set(reference = enums.DetectReferenceB.ABSolute)

The reference level to be used for setting the pulse detection threshold.

Parameters:

reference – REFLevel | PEAK | NOISe | ABSolute REFLevel Current reference level PEAK Peak level as measured over the entire capture data interval NOISe Noise level determined from the current capture data according to SENSe:TRACe:MEASurement:DEFine:DURation:MIN. ABSolute Absolute level defined by method RsFsw.applications.k6Pulse.sense.detect.threshold.set() .