Mphase

SCPI Command :

CALCulate<n>:TABLe:TSIDelobe:MPHase
class MphaseCls[source]

Mphase commands group definition. 3 total commands, 1 Subgroups, 1 group commands

get(window=Window.Default) bool[source]
# SCPI: CALCulate<n>:TABLe:TSIDelobe:MPHase
value: bool = driver.applications.k6Pulse.calculate.table.tsidelobe.mphase.get(window = repcap.Window.Default)

If enabled, the mainlobe phase (in degrees) is included in the result tables.

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

return

state: ON | OFF | 1 | 0

set(state: bool, window=Window.Default) None[source]
# SCPI: CALCulate<n>:TABLe:TSIDelobe:MPHase
driver.applications.k6Pulse.calculate.table.tsidelobe.mphase.set(state = False, window = repcap.Window.Default)

If enabled, the mainlobe phase (in degrees) is included in the result tables.

param state

ON | OFF | 1 | 0

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.applications.k6Pulse.calculate.table.tsidelobe.mphase.clone()

Subgroups