Tsidelobe

SCPI Command :

CALCulate<n>:PSPectrum:TSIDelobe

class TsidelobeCls

Tsidelobe commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(window=Window.Default) → RsFsw.enums.PulseSidelobeItems

# SCPI: CALCulate<n>:PSPectrum:TSIDelobe
value: enums.PulseSidelobeItems = driver.applications.k6Pulse.calculate.pspectrum.tsidelobe.get(window = repcap.Window.Default)

Configures the Time Sidelobe Parameter Spectrum result display. Is only available if the additional option FSW-K6S is installed.

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

return

param: PSLevel | ISLevel | MWIDth | SDELay | CRATio | IMPower | AMPower | PCORrelation | MPHase | MFRequency Time sidelobe parameter to be displayed on the x-axis. For a description of the available parameters see ‘Time sidelobe parameters’. PSLevel peak to sidelobe level ISLevel integrated sidelobe level MWIDth mainlobe 3 dB width SDELay sidelobe delay CRATio compression ratio IMPower integrated mainlobe power AMPower average mainlobe power PCORrelation peak correlation MPHase mainlobe phase MFRequency mainlobe frequency

set(param: RsFsw.enums.PulseSidelobeItems, window=Window.Default) → None

# SCPI: CALCulate<n>:PSPectrum:TSIDelobe
driver.applications.k6Pulse.calculate.pspectrum.tsidelobe.set(param = enums.PulseSidelobeItems.AMPower, window = repcap.Window.Default)

Configures the Time Sidelobe Parameter Spectrum result display. Is only available if the additional option FSW-K6S is installed.

param param

PSLevel | ISLevel | MWIDth | SDELay | CRATio | IMPower | AMPower | PCORrelation | MPHase | MFRequency Time sidelobe parameter to be displayed on the x-axis. For a description of the available parameters see ‘Time sidelobe parameters’. PSLevel peak to sidelobe level ISLevel integrated sidelobe level MWIDth mainlobe 3 dB width SDELay sidelobe delay CRATio compression ratio IMPower integrated mainlobe power AMPower average mainlobe power PCORrelation peak correlation MPHase mainlobe phase MFRequency mainlobe frequency

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)