Frequency

SCPI Command :

CALCulate<n>:PSPectrum:FREQuency

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(window=Window.Default) → PulseFreqItems[source]

# CALCulate<n>:PSPectrum:FREQuency
value: enums.PulseFreqItems = driver.applications.k6Pulse.calculate.pspectrum.frequency.get(window = repcap.Window.Default)

Configures the Parameter Spectrum result display.

Parameters:: window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)
Returns:: param: POINt | PPFRequency | RERRor | PERRor | DEViation | CRATe Pulse parameter to be displayed on the x-axis. For a description of the available parameters see ‘Frequency parameters’. POINt Frequency at measurement point PPFRequency Pulse-Pulse Frequency Difference RERRor Frequency Error (RMS) PERRor Frequency Error (Peak) DEViation Frequency Deviation CRATe Chirp Rate

set(param: PulseFreqItems, window=Window.Default) → None[source]

# CALCulate<n>:PSPectrum:FREQuency
driver.applications.k6Pulse.calculate.pspectrum.frequency.set(param = enums.PulseFreqItems.CRATe, window = repcap.Window.Default)

Configures the Parameter Spectrum result display.

Parameters:

param – POINt | PPFRequency | RERRor | PERRor | DEViation | CRATe Pulse parameter to be displayed on the x-axis. For a description of the available parameters see ‘Frequency parameters’. POINt Frequency at measurement point PPFRequency Pulse-Pulse Frequency Difference RERRor Frequency Error (RMS) PERRor Frequency Error (Peak) DEViation Frequency Deviation CRATe Chirp Rate
window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)