State

SCPI Command :

INPut:GAIN:STATe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get() → bool

# INPut:GAIN:STATe
value: bool = driver.applications.k60Transient.inputPy.gain.state.get()

Turns the internal preamplifier on and off. It requires the optional preamplifier hardware. Note that if an optional external preamplifier is activated, the internal preamplifier is automatically disabled, and vice versa. Is not available for input from the optional ‘Digital Baseband’ interface. For all FSW models except for FSW85, the preamplification is defined by method RsFsw.applications.k10Xlte.inputPy.gain.value.set() . For older FSW43/FSW50/FSW67 models, the input signal is always ampilfied by about 30 dB when the preamplifier is active. For FSW85 models, no preamplifier is available. If option R&S FSW-B22 is installed, the preamplifier is only active below 7 GHz. If option R&S FSW-B24 is installed, the preamplifier is active for all frequencies.

Returns:

state: ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on

set(state: bool) → None

# INPut:GAIN:STATe
driver.applications.k60Transient.inputPy.gain.state.set(state = False)

Turns the internal preamplifier on and off. It requires the optional preamplifier hardware. Note that if an optional external preamplifier is activated, the internal preamplifier is automatically disabled, and vice versa. Is not available for input from the optional ‘Digital Baseband’ interface. For all FSW models except for FSW85, the preamplification is defined by method RsFsw.applications.k10Xlte.inputPy.gain.value.set() . For older FSW43/FSW50/FSW67 models, the input signal is always ampilfied by about 30 dB when the preamplifier is active. For FSW85 models, no preamplifier is available. If option R&S FSW-B22 is installed, the preamplifier is only active below 7 GHz. If option R&S FSW-B24 is installed, the preamplifier is active for all frequencies.

Parameters:

state – ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on