CmOffset

SCPI Command :

[SENSe]:PROBe<pb>:SETup:CMOFfset

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(probe=Probe.Default) → float

# [SENSe]:PROBe<pb>:SETup:CMOFfset
value: float = driver.applications.k50Spurious.sense.probe.setup.cmOffset.get(probe = repcap.Probe.Default)

Sets the common mode offset. The setting is only available if a differential probe in CM-mode is connected to the FSW. If the probe is disconnected, the common mode offset of the probe is reset to 0.0 V. Note that if the offset for DM-mode or CM-mode is changed, the offsets for the P-mode and N-mode are adapted accordingly, and vice versa. For details see ‘Using Probes’.

Parameters:

probe – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Probe’)

Returns:

cm_offset: Offset of the mean voltage between the positive and negative input terminal vs. ground Range: -16 V to +16 V, Unit: V

set(cm_offset: float, probe=Probe.Default) → None

# [SENSe]:PROBe<pb>:SETup:CMOFfset
driver.applications.k50Spurious.sense.probe.setup.cmOffset.set(cm_offset = 1.0, probe = repcap.Probe.Default)

Sets the common mode offset. The setting is only available if a differential probe in CM-mode is connected to the FSW. If the probe is disconnected, the common mode offset of the probe is reset to 0.0 V. Note that if the offset for DM-mode or CM-mode is changed, the offsets for the P-mode and N-mode are adapted accordingly, and vice versa. For details see ‘Using Probes’.

Parameters:

• cm_offset – Offset of the mean voltage between the positive and negative input terminal vs. ground Range: -16 V to +16 V, Unit: V

• probe – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Probe’)