Address

SCPI Command :

SYSTem:COMMunicate:GPIB:RDEVice:GENerator:ADDRess

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get() → int

# SYSTem:COMMunicate:GPIB:RDEVice:GENerator:ADDRess
value: int = driver.applications.k30NoiseFigure.system.communicate.gpib.rdevice.generator.address.get()

Changes the IEC/IEEE-bus address of the external generator. Is only valid if External Generator Control (R&S FSW-B10) is installed.

Returns:

number: Range: 0 to 30

set(number: int) → None

# SYSTem:COMMunicate:GPIB:RDEVice:GENerator:ADDRess
driver.applications.k30NoiseFigure.system.communicate.gpib.rdevice.generator.address.set(number = 1)

Changes the IEC/IEEE-bus address of the external generator. Is only valid if External Generator Control (R&S FSW-B10) is installed.

Parameters:

number – Range: 0 to 30