Band#

SCPI Commands :

[SENSe]:MIXer:HARMonic:BAND
[SENSe]:MIXer:HARMonic:BAND:PRESet
Commands in total: 2
Subgroups: 0
Direct child commands: 2
get ( ) → Band
set ( band: Band ) → None
# [SENSe]:MIXer:HARMonic:BAND
# get:
value: enums.Band = driver.applications.k30NoiseFigure.sense.mixer.harmonic.band.get()
# set:
driver.applications.k30NoiseFigure.sense.mixer.harmonic.band.set(band = enums.Band.A)

Selects the external mixer band. The query returns the currently selected band. Is only available if the external mixer is active (see method RsFsw.applications.k50Spurious.sense.mixer.state.set() ) .

Parameters:

band – Standard waveguide band or user-defined band.

preset ( ) → None
preset_with_opc ( opc_timeout_ms: int = -1 ) → None
# [SENSe]:MIXer:HARMonic:BAND:PRESet
driver.applications.k30NoiseFigure.sense.mixer.harmonic.band.preset()
driver.applications.k30NoiseFigure.sense.mixer.harmonic.band.preset_with_opc(opc_timeout_ms = 3000)

Restores the preset frequency ranges for the selected standard waveguide band. Note: Changes to the band and mixer settings are maintained even after using the PRESET function. Use this command to restore the predefined band ranges.

preset_with_opc() does the same as preset(), but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout to set the timeout value.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.