Dtime#

SCPI Command :

TRIGger[:SEQuence]:DTIMe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get ( ) → float
set ( time: float ) → None
# TRIGger[:SEQuence]:DTIMe
# get:
value: float = driver.applications.k17Mcgd.trigger.sequence.dtime.get()
# set:
driver.applications.k17Mcgd.trigger.sequence.dtime.set(time = 1.0)

Defines the time the input signal must stay below the trigger level before a trigger is detected again. For input from the Analog Baseband interface using the baseband power trigger (BBP) , the default drop out time is set to 100 ns to avoid unintentional trigger events (as no hysteresis can be configured in this case) .

Parameters:

time – Dropout time of the trigger.