Connector#

SCPI Command :

INPut:CONNector
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get ( ) → InputConnectorC
set ( input_connectors: InputConnectorC ) → None
# INPut:CONNector
# get:
value: enums.InputConnectorC = driver.applications.k17Mcgd.inputPy.connector.get()
# set:
driver.applications.k17Mcgd.inputPy.connector.set(input_connectors = enums.InputConnectorC.RF)

Determines which connector the input for the measurement is taken from. For more information, see . If an external frontend is active, the connector is automatically set to RF.

Parameters:

input_connectors –

  • RF: RF input connector

  • AIQI: Analog Baseband I connectorThis setting is only available if the Analog Baseband interface is installed and active for input. It is not available for the FSW67 or FSW85.For more information on the Analog Baseband interface, see the FSW I/Q Analyzer and I/Q Input User Manual.

  • RFPRobe: Active RF probe