Slope

SCPI Command :

TRIGger[:SEQuence]:SLOPe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get() → SlopeType

# TRIGger[:SEQuence]:SLOPe
value: enums.SlopeType = driver.applications.k14Xnr5G.trigger.sequence.slope.get()

For external and time domain trigger sources, you can define whether triggering occurs when the signal rises to the trigger level or falls down to it.

Returns:

type_py: POSitive | NEGative POSitive Triggers when the signal rises to the trigger level (rising edge) . NEGative Triggers when the signal drops to the trigger level (falling edge) .

set(type_py: SlopeType) → None

# TRIGger[:SEQuence]:SLOPe
driver.applications.k14Xnr5G.trigger.sequence.slope.set(type_py = enums.SlopeType.NEGative)

For external and time domain trigger sources, you can define whether triggering occurs when the signal rises to the trigger level or falls down to it.

Parameters:

type_py – POSitive | NEGative POSitive Triggers when the signal rises to the trigger level (rising edge) . NEGative Triggers when the signal drops to the trigger level (falling edge) .