Value

SCPI Command :

[SENSe]:ESPectrum<sb>:RANGe<range>:INPut:GAIN[:VALue]
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(subBlock=SubBlock.Default, rangePy=RangePy.Default) → float[source]
# [SENSe]:ESPectrum<sb>:RANGe<range>:INPut:GAIN[:VALue]
value: float = driver.applications.k14Xnr5G.sense.espectrum.range.inputPy.gain.value.get(subBlock = repcap.SubBlock.Default, rangePy = repcap.RangePy.Default)

This command selects the gain for a SEM range. In case of high speed measurements, the level of the preamplifier has to be identical for all ranges.

Parameters:

  • subBlock – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Espectrum’)

  • rangePy – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Range’)

Returns:

gain: 15 dB | 30 dB The availability of preamplification levels depends on the FSW model. - FSW8/13: 15dB and 30 dB - FSW26 or higher: 30 dB All other values are rounded to the nearest of these two.

set(gain: float, subBlock=SubBlock.Default, rangePy=RangePy.Default) → None[source]
# [SENSe]:ESPectrum<sb>:RANGe<range>:INPut:GAIN[:VALue]
driver.applications.k14Xnr5G.sense.espectrum.range.inputPy.gain.value.set(gain = 1.0, subBlock = repcap.SubBlock.Default, rangePy = repcap.RangePy.Default)

This command selects the gain for a SEM range. In case of high speed measurements, the level of the preamplifier has to be identical for all ranges.

Parameters:

  • gain – 15 dB | 30 dB The availability of preamplification levels depends on the FSW model. - FSW8/13: 15dB and 30 dB - FSW26 or higher: 30 dB All other values are rounded to the nearest of these two.

  • subBlock – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Espectrum’)

  • rangePy – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Range’)