Stop

SCPI Command :

[SENSe]:ESPectrum<sb>:RANGe<range>[:FREQuency]:STOP
class StopCls[source]

Stop commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(subBlock=SubBlock.Default, rangePy=RangePy.Default) → float[source]
# SCPI: [SENSe]:ESPectrum<sb>:RANGe<range>[:FREQuency]:STOP
value: float = driver.applications.k149Uwb.sense.espectrum.range.frequency.stop.get(subBlock = repcap.SubBlock.Default, rangePy = repcap.RangePy.Default)
Defines the stop frequency of a SEM range. Make sure to set an appropriate span. If you set a span that is

INTRO_CMD_HELP: Note:

  • smaller than the span the SEM sweep list covers, the FSW will not measure the ranges that are outside the span - results may be invalid.

  • greater than the span the SEM sweep list covers, the FSW will adjust the start frequency of the first SEM range and the stop frequency of the last SEM range to the span

For more information see ‘Ranges and range settings’.

param subBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Espectrum’)

param rangePy

optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Range’)

return

max_py: No help available

set(max_py: float, subBlock=SubBlock.Default, rangePy=RangePy.Default) → None[source]
# SCPI: [SENSe]:ESPectrum<sb>:RANGe<range>[:FREQuency]:STOP
driver.applications.k149Uwb.sense.espectrum.range.frequency.stop.set(max_py = 1.0, subBlock = repcap.SubBlock.Default, rangePy = repcap.RangePy.Default)
Defines the stop frequency of a SEM range. Make sure to set an appropriate span. If you set a span that is

INTRO_CMD_HELP: Note:

  • smaller than the span the SEM sweep list covers, the FSW will not measure the ranges that are outside the span - results may be invalid.

  • greater than the span the SEM sweep list covers, the FSW will adjust the start frequency of the first SEM range and the stop frequency of the last SEM range to the span

For more information see ‘Ranges and range settings’.

param max_py

No help available

param subBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Espectrum’)

param rangePy

optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Range’)