Coupling

SCPI Command :

INPut:IQ:OSC:COUPling

class CouplingCls[source]

Coupling commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → RsFsw.enums.CouplingTypeB[source]

# SCPI: INPut:IQ:OSC:COUPling
value: enums.CouplingTypeB = driver.applications.k149Uwb.inputPy.iq.osc.coupling.get()

Determines the coupling of the oscilloscope to the FSW.

return

coupling: DC | DCLimit | AC DC DC coupling shows all parts of an input signal. DC 50 Ohm coupling is the default for 50Ohm input impedance to connect, for example, active probes. DCLimit DC coupling with 1 M Ohm input impedance to connect standard passive probes. AC AC coupling is useful if the DC component of a signal is of no interest. AC coupling blocks the DC component of the signal so that the waveform is centered on zero volts.

set(coupling: RsFsw.enums.CouplingTypeB) → None[source]

# SCPI: INPut:IQ:OSC:COUPling
driver.applications.k149Uwb.inputPy.iq.osc.coupling.set(coupling = enums.CouplingTypeB.AC)

Determines the coupling of the oscilloscope to the FSW.

param coupling

DC | DCLimit | AC DC DC coupling shows all parts of an input signal. DC 50 Ohm coupling is the default for 50Ohm input impedance to connect, for example, active probes. DCLimit DC coupling with 1 M Ohm input impedance to connect standard passive probes. AC AC coupling is useful if the DC component of a signal is of no interest. AC coupling blocks the DC component of the signal so that the waveform is centered on zero volts.