Y

SCPI Command :

CALCulate<n>:MARKer<m>:Y

class YCls

Y commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(window=Window.Default, marker=Marker.Default) → float

# SCPI: CALCulate<n>:MARKer<m>:Y
value: float = driver.applications.k149Uwb.calculate.marker.y.get(window = repcap.Window.Default, marker = repcap.Marker.Default)

Queries the position of a marker on the y-axis. In result displays with a third aspect (for example ‘EVM vs Symbol x Carrier’) , you can also use the command to define the position of the marker on the y-axis. If necessary, the command activates the marker first. To get a valid result, you have to perform a complete measurement with synchronization to the end of the measurement before reading out the result. This is only possible for single measurement mode. See also method RsFsw.Applications.K10x_Lte.Initiate.Continuous.set.

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param marker

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Marker’)

return

value_stimulus: No help available

set(value_stimulus: float, window=Window.Default, marker=Marker.Default) → None

# SCPI: CALCulate<n>:MARKer<m>:Y
driver.applications.k149Uwb.calculate.marker.y.set(value_stimulus = 1.0, window = repcap.Window.Default, marker = repcap.Marker.Default)

Queries the position of a marker on the y-axis. In result displays with a third aspect (for example ‘EVM vs Symbol x Carrier’) , you can also use the command to define the position of the marker on the y-axis. If necessary, the command activates the marker first. To get a valid result, you have to perform a complete measurement with synchronization to the end of the measurement before reading out the result. This is only possible for single measurement mode. See also method RsFsw.Applications.K10x_Lte.Initiate.Continuous.set.

param value_stimulus

No help available

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param marker

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Marker’)