UaaChannel

SCPI Command :

[SENSe]:POWer:ACHannel:UAAChannel

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get() → AdjChannelBw[source]

# [SENSe]:POWer:ACHannel:UAAChannel
value: enums.AdjChannelBw = driver.applications.k10Xlte.sense.power.achannel.uaaChannel.get()

For MC ACLR measurements, the command selects the bandwidth of the upper adjacent channel.

Returns:: bandwidth: EUTRA Selects an EUTRA signal of the same bandwidth like the TX channel as assumed adjacent channel carrier. UTRA128 Selects an UTRA signal with a bandwidth of 1.28MHz as assumed adjacent channel carrier. UTRA384 Selects an UTRA signal with a bandwidth of 3.84MHz as assumed adjacent channel carrier. UTRA768 Selects an UTRA signal with a bandwidth of 7.68MHz as assumed adjacent channel carrier.

set(bandwidth: AdjChannelBw) → None[source]

# [SENSe]:POWer:ACHannel:UAAChannel
driver.applications.k10Xlte.sense.power.achannel.uaaChannel.set(bandwidth = enums.AdjChannelBw.EUTRa)

For MC ACLR measurements, the command selects the bandwidth of the upper adjacent channel.

Parameters:: bandwidth – EUTRA Selects an EUTRA signal of the same bandwidth like the TX channel as assumed adjacent channel carrier. UTRA128 Selects an UTRA signal with a bandwidth of 1.28MHz as assumed adjacent channel carrier. UTRA384 Selects an UTRA signal with a bandwidth of 3.84MHz as assumed adjacent channel carrier. UTRA768 Selects an UTRA signal with a bandwidth of 7.68MHz as assumed adjacent channel carrier.