Lte

SCPI Command :

[SENSe]:ADJust:CONFigure:LTE
Commands in total: 1
Subgroups: 0
Direct child commands: 1
set() → None[source]
# [SENSe]:ADJust:CONFigure:LTE
driver.applications.k10Xlte.sense.adjust.configure.lte.set()

Automatically detects several signal characteristics and selects the appropriate parameters in the application. The following signal characteristics are automatically detected.

  • Carrier bandwidth

  • MIMO configuration

set_with_opc(opc_timeout_ms: int = -1) → None[source]
# [SENSe]:ADJust:CONFigure:LTE
driver.applications.k10Xlte.sense.adjust.configure.lte.set_with_opc()

Automatically detects several signal characteristics and selects the appropriate parameters in the application. The following signal characteristics are automatically detected.

  • Carrier bandwidth

  • MIMO configuration

Same as set, but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout_set() to set the timeout value.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.